Everything You Need To Know About Replacement Handles For Upvc Windows Dos And Don'ts

Replacement Handles For UPVC Windows

uPVC window handles can loosen and drop off. With the right tools, it's easy to replace the handles.

Check for the screws or pins that hold it in place to determine the type of handle. Once you have identified them, take them off and carefully pull the handle off the spindle.

Espag Handle

Espag handles are typically found on double-glazed uPVC Windows. They are cylindrical and flat in shape. They're typically made from uPVC but they can also be made from other materials depending on the design and style of your window. Handles are available in many designs and colors to complement your decor.

The espag may also be called a cockspur or spade. It's used on older uPVC windows and can be used as a replacement for a broken one. They're not as secure as modern handles however they do provide an easy locking mechanism. The handle is made of two round studs called mushrooms that are able to move upwards and downwards as the handle is rotated. These catch into an iron plate that is attached to the frame, which is known as a keep. The handle is also available in a cranked model which provides more space to hold with a more sleek appearance. or an inline model.

These kinds of uPVC window handles are often found on older timber windows as well as double-glazed windows. They're often made from aluminum or uPVC however they may be made of other materials too. Window handles made of Espag are locked by a key, or by using wedge blocks that go between the handle and frame. They are also easy to maintain and you can buy replacement parts in the event of a fail to function.

To choose a suitable espag handle for your window, first verify the size of the spindle that is on the back of the handle. This should be a maximum of 7mm in diameter. Also, you should take a measurement of the height where the handle is attached to the window frame. If you select the correct handle size, your window will close with a tight seal.

Monkey tail espag handles are a great choice for historic windows. They're also suitable for contemporary windows and come in left-hand or right-hand versions. They have a stylish design with a reeded finish at the end and a thin backplate which fits into the window frame. The handles can be locked and come with a good height.

Venetian Handle

When you are replacing your window handles made of upvc, there are several different types of handles to pick from. There are  door handle repair  of handles to choose from, including Cockspur handles (also known as Espag handles), blade or spade handles and tilt and turn handles. The type of handle that you select will depend on the style of window you have and on your personal preferences. Take into consideration the size of the handles and the spindle. It is essential to ensure that the new handle fits into the screw holes and has the proper spindle length.

The cockspur handle on windows made of upvc is among of the most well-known types. They are available in a range of finishes and colors. They are also available in locking and non-locking models. The major difference between them is that a cockspur handle can be locked using the use of a key. The version that is keyed is typically used for properties with high security and is more secure than the standard handle.

Venetian handles, just like Espagnolette handles, are generally joined by two bolts. They have a low projection from the frame and don't cause blinds to be damaged like other window handles. They are also a good choice for flats with a high rise because they are easy to clean from the inside. Window handles are a great choice if you are looking for a stylish and practical replacement for your upvc windows.

There's a handle for every style of window. When choosing a replacement handle, you should be aware of the size and shape the screw holes are, the step height and the length of the spindle and the handing. The handle should also be able to support the weight of your window when it is closed.

A tilt-and-turn handle is ideal for a window made of upvc which opens from the side. It offers a dual function and lets you tilt and turn the window, which is beneficial for ventilation cleaning, security and ventilation. It's also simple to operate even with just one hand. The handle can be placed to secure the window in an open position or can be set to tilt to allow you to enjoy fresh air without having to worry about burglars breaking in.

Pear Drop Handle

If you've got a damaged uPVC window lock or handle, it's likely that you'll need to replace it. It's easy to do it yourself. First, ensure that your window is shut, then take off the screw at the base of the handle. Once you remove the two screws the handle will fall off. The multipoint lock can be removed by removing the two screws. After the new handle is constructed, you can screw it into place. If the handle has a screw cover, put it back on, too.

Espagnolette handles are the most common kind of handle that is used on uPVC windows. They can be identified by their flat strip design and can be used with multipoint locks that are placed around the frame to provide top-of-the-line home security. They can open from either the left or right, and come in a variety of designs.

Cockspur handles have a more traditional appearance. They are popular for their heritage improvements, and for those who like an appearance that is more traditional. These handles have a spindle that passes through the handle and into the gearbox. This turns a series shootbolt rods to secure the window.

Pear drop handles provide an increased level of security and are more modern than cockspur-style handles. They're a great choice for those looking to upgrade their windows with a modern handle that is still a great match with the past of their property.

The Cornish Heritage Tear Drop Espag Handle is inspired by 19th Century ironmongery and is perfectly suited to heritage casement windows to ensure that your home's exterior is finished with a classy look. This handle can be combined with a teardrop operating stop and dummy remains to create an authentic window that matches perfectly.

Choosing the correct handle replacement for your uPVC windows can be a daunting task, but our handy guide and helpful advice will ensure that you get the best results. Bridgewater Glass can help you upgrade your entire window set, or replace your existing uPVC handle and lock.

Handle that is tilted and turns

Tilt and turn handles are used on double-glazed windows that open to the outside and tilted back or down for ventilation. The handle can be rotated and a lock mechanism is activated when the window is tilted into either position. These windows are very popular in Europe. They provide better airflow, and are more secure. When replacing the handle of a uPVC tilt and turn handle, the new one should be compatible with the window model and locking mechanism to ensure proper functionality and security.

Tilt-and turn windows are typically made out of uPVC or aluminum and a timber frame as an alternative for those looking to add a more traditional look and feel to their home. UPVC frames are the most value and are durable, energy efficient, and require little maintenance. Aluminum frames however are a more costly option, but offer the strongest strength and resistance to corrosion.

The uPVC tilt and turn handle works similarly similar to an espagnolette handle however it is larger and heavier because they are fitted to larger windows, usually up to door size. They are also more durable because they have to withstand more force when the window opens inwards or can be tilted.

When it comes to replacing a tilt and turn handle, the key factor is that the handle has the ability to be locked into any of four positions to prevent the window being opened fully into the room. This can be done by using a key, which is beneficial when children are present to prevent them from opening the window too wide and causing injury.

This means that the majority of tilt and turn window handles that are on the market will have this feature built into the standard model with the exception of cheap Chinese-made items. Sealco Scotland stock a wide assortment of premium tilt and turn handles from brands like Hoppe, Trojan, and Sensei.

When you are buying a tilt and turn window handle it is essential to measure the existing handle to determine the best style to fit. You'll need to determine the distance between the screw fixing holes which are normally 43mm centre to centre. Some handles may have screws hidden by cover caps or a spring loaded backplate, and you'll need to remove these before you can reveal the fixing positions.